25mm x 20m Flexible Rubber Hose With Claw Fittings

The Sparkle 20m by 1 inch flexible rubber hose is perfect for those temporary applications. Particularly where you may be moving around to remove water from a different areas.

They are easily laid out and rolled back up when you need them but are heavy duty enough that they can be used on construction sites, around the home inside a pit removing ground water.

The hose has a plain end so they can easily have a fitting attachment put on them. We supply them with a quick attach claw fitting on each end that only requires a quarter turn to connect them.

This hose has an internal diameter of 25mm to allow maximum water flow and minimal restriction. This allows you to get more water out at any one time and also gives the pump as easy a life as possible. This will ensure the pump lasts much longer and can also handle longer hose runs. It also means that the pump will be able to push water higher than what would it otherwise be able to do give you more flexibility.

The hose is fully reinforced with a synthetic braided cord increasing it’s strength and make it able to withstand light vehicles driving over it.

The reinforcing also means the burst pressure of this hose is 3 times the working pressure of the hose.

We recommend having a maximum hose length of 40m with a pump. That means two of the 20m hose lengths joined end to end.

The hose weighs .8kg per meter so you must use caution when carrying it and make sure proper safety precautions are used.

This hose is perfect for most Australian weather conditions as the temperature range is -35 degrees to +70 degrees Celsius.