ASC D45VAMAG Vortex Drainage Sump Pump

ASC D45VAMAG Vortex Drainage Sump Pump

The ASC D45VAMAG is a vertical float sump pump designed for use in confined spaces, where a normal float may get stuck. It can be used in grey water pumping, sump emptying, septic effluent pumping, water transfer and the pumping of light industrial and factory waste systems. The open nature of the semi vortex impeller allows for suspended solids of up to 15mm and means the pump is less susceptible to blockages.

The ASC D45VAMAG is characterised by a cast iron body and impeller for durability and the heavy handed nature of builders, plumbers and civil earth workers who throw these pumps in and out of utes and into pits for pumping of dirty water. The ASC D25VAMAG sump pump has a carry handle, 10m H07RNF power cable, an automatic float switch and pumps to heads of 11.0m. With a flow rate of up to 430LT/min, trust ASC to deliver the drainage pump solution for your project.

Pump Characteristics:

• Cast iron pump body and impeller for durability
• Fully automatic operation with vertical float arm.
• Dual mechanical seal – carbon/ceramic
• Handy carry handle
• Universal hose tail adaptor
• 240V single phase motor with in-built auto reset thermal overload.
• 10m H07RNF power cable.
• Dewatering of cellars, etc.
• Pumping clean or slightly dirty water
• Flows to 430 L/min
• Heads to 11.0m
• Pump starts at 335mm and stops at 195mm

• Suitable for grey water pumping, sump emptying, septic effluent pumping, water transfer and pumping of light industrial waste