ASC M60/120 Multistage Domestic Pump

ASC M60/120 Domestic Horizontal Multistage Water Pump

The ASC M60/120 water pump is a horizontal multistage pump. This pump has been designed to supply a  large domestic home and irrigation systems. If you are looking for high pressure showers and irrigation, then the M60/120 is the pump you are after. This pump is capable of running 3-4 showers at once and still have 500kPa pressure.

The benefit of the multistage design allows better performance as more taps are turned on at the home. The pressure drop is not as prominent when compared to a jet jump. Another advantage of our engineered multistage range aside from the reliability and ease of install, ultra quiet nature of  horizontal multistage pumps. The water inside the pump follows a much smoother path, meaning much less noise; in fact a multistage pump of similar performance to a JET pump or turbine pump will be about a quarter of the noise level. The ASC M60/120 comes with an automatic restart pressure controller that will start and stop the pump on demand, and also includes dry run protection. 

Pump Characteristics:

Pump Characteristics:

• Automatic Pressure Controller to turn the pump on and off on demand, with built in dry run protection.
• Run dry protection to prevent pump damage.
• Automatic electronic controller has a in-built check valve to prevent water back flowing through the pump.
• 2.2bar pump cut in for greater versatility.
• Corrosion resistant pump body, diffuser and stainless steel impeller to ensure pump durability.
• High quality mechanical shaft seal and high quality bearings.
• 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
• IP55 Protection / Insulation F

• Suitable for large domestic homes and irrigation systems. The M60/120 is recommended to be used with a suitable size pressure tank.