Zenit DRBLUEP200/2/G50VMGEX Floatless Drainage Pump

Zenit DRBLUEP200/2/G50VMGEX Floatless Drainage Pump - [711710]

DR (DRENO) version with multi-vane fully submerged cast iron impeller for efficient operation, float switch optional on single-phase versions. Comes complete with a 10m power lead (with 3 pin plug on single-phase pumps) to suit outdoor installations. Patented sealing system incorporating dual silicon carbide mechanical seals in oil bath for longer seal life. Anti-stressing system for power cable reduces cable damage and water entry.
Includes a cable holder grommet built into handle which allows adjustment of float switch cable length, and a cast iron pump body for durability. The strainer construction and the particular curvature of the impeller blades
allow passage of solid bodies of maximum 15mm. Also includes a built in air bleed valve, a suction screen in stainless steel to keep out hard solids, and an ergonomical Polyglass handle for safety and comfort.

Suitable for:
• Clean or slightly soiled water containing small solids
• Stormwater dewatering from under houses, yards and ponds
• Groundwater seepage, rainwater collection
• Water features
• Car parks, truck stops, vehicle workshops, bus depots and garages

• Outlet: G2″
• Outlet orientation: V (vertical)
• Type of starting: D
• Weight: 24 kg
• Standard cable type: H07RN-F 3G1
• EX cable type: N.A.
• Standard paint type: Bicomponent epoxy paint
• Maximum acoustic pressure: 70 dB
• Set of standard mechanical seals: Two Silicon carbide mechanical seal (SiC)

Use limits:

• Maximum operating temperature: 40 °C
• Maximum immersion depth: 20 m
• PH of treated fluid: 6 to 14 pH
• Max starts per hour: 30

Test limits:

• Density of treated fluid: 1 Kg/dm³
• Viscosity of treated fluid: 1 mm²/s

Materials:

• Case: Grey Cast Iron – EN-GJL 250 (02)
• Shaft: Stainless Steel – AISI 420 (23)
• Cooling jacket: Not applicable (00)
• Standard gasket: Rubber – NBR (77)
• EX gasket: Not applicable (00)
• Nuts and bolts: Stainless Steel – Class A2-70 (42)
• Hydraulic: Grey Cast Iron – EN-GJL 250 (02)
• Impeller: Grey Cast Iron – EN-GJL 250 (02)
• Cutting disk: Not applicable (00)
• Cutter: Not applicable (00)
• Grid: Plastic (73)